Air-source heat pumps

Rheem Endeavor Line Prestige RP19AY Inverter Heat Pump

Rheem RP19AY48Pro Partner and big-box retail 68% data complete
$8,590 – $10,090
equipment only · est. — outdoor unit from 1 seller, indoor air handler added

Prices are the equipment only — the appliance, before install labour. Where we could only find an installed price, the labour is a national planning estimate backed out to approximate the equipment, so treat those as rough. Get contractor quotes for the install itself.

How that figure is built
Outdoor unit as listed observed $7,090
1 seller(s), seen 2026-08-16
Indoor air handler estimated $1,500 – $3,000
Universal outdoor units are sold separately from the indoor unit. An SVZ air handler or PEAD ducted unit is required.

See the 1 listing this comes from →

Rheem's current inverter-driven variable-speed heat pump on the new R-454B refrigerant, and an open 24V system that works with any thermostat.

Our take

The RP19AY is the Endeavor line's answer to the premium inverters, and its two quiet advantages are practical rather than headline: it is already on R-454B, so no phase-down service tax, and it is an open 24V system — any competent tech, any thermostat. The 2.5:1 turndown is shallower than the Bryant's, and HSPF2 is mid-pack, so it is a serviceability-and-refrigerant play, not a peak-spec one.

Best for

Buyers who prize open serviceability and current refrigerant over top specs.

Watch out for

HSPF2 of 8.5 is unremarkable; 2.5:1 turndown is shallower than the best.

What sellers are actually charging

Real listings, read on the date shown. Prices change — click through to check before you act on any of them.

SellerWhat you getPriceSeen
The AC Outlet
online retailer
Rheem Endeavor RP19AY 4-ton 19 SEER2 R-454B variable-speed condenser
RP19AY48AJVCA
$7,090
$14,180
2026-08-16

Equipment price is not installed price. The listings above are what the hardware costs. Installation — labour, electrical, refrigerant lines, permits, removing the old system — is typically a similar amount again, and varies more between contractors than between brands. Where we have an installed figure it is labelled as such and comes from someone who actually installs.

Compare against

Before you buy this

Ask the contractor for the AHRI certificate number for the specific indoor/outdoor combination being installed — ratings apply to matched pairs, not to the outdoor unit alone. Ask whether they will perform a Manual J load calculation rather than sizing off the equipment being replaced. And check your state and utility incentive programmes: there is no federal tax credit for a 2026 installation, so those programmes are now the only incentive money available, and many require approval before installation.